Features: Printer mechanism compatible with FTP628MCL101 Wide power range DC12~24 V Full /partial cutting mode (by adjustable) Multiple interfaces Big roll holder
Specification:
| Mechanism： | MS628MCL101 | | Printing method | Thermal dot line printing | | Dots/line | 384 dots/line | | Dot pitch | 8 dot/mm | | Paper width | 58 mm | | Printing width | 48 mm | | Paper thickness | 54~78 um | | Printing speed | 100 mm/s | | Paper feed direction | 180° horizontal | | Sensors | Head temperature | Thermistor | | Paper press shaft | Mechanical switch | | Paper end | Photo interrupter | | Paper loading | Easy loading | | Font size | ASCII:9*17;12*24;
Chinese: 24*24 | | Power supply | Logic circuit | 2.6~3.6 V | | Motor | 4.75 ~9.5 V | | Dimension (L*W*H) | 98*53.2*57.7 mm | | Weight | Approx 200g | | Reliability | Circuit: over 1,000,000,000 pulses
Cutter: over 7,000,000 cuts
Thermal head: over 100 km
MCBF: 37,000,000 lines | | Ambient environment | Work temperature | 0 ℃~50℃ | | Work humidity | 20~85% RH | | Storage temperature | -20℃~60℃ | | Storage humidity | 10~90% RH | | Weight | 230 g | | Interface | RS-232/TTL/USB | | power supply | DC 12~24V/2.5A | | Command set | ESC/POS | | Barcode | supported | | Firmware location | 2 M NV Flash memory | | Buffer | 4 KB | | SRAM | 20 KB | | System | Windows/Android/Linux | | Accessories: | paper near end sensor; | | Paper holding unit; | | Paper bezel (paper guide mouth) | | Interface connector | | Power supply unit | | Cable |
Applications:
Kiosks, supermarket locker, lottery machine, medical instrument, recycle machine, queue management system; ID automation, attendance terminals, ticket dispenser and more.
|
